Skip to content
Sumi AgroSKU 36294

Botrefin 1kg

Botrefin is a fungicide in the form of a granule concentrate for preparing a water suspension (WG), acting both on the surface and systemically. It is used preventively and interventively to protect strawberries, raspberries, beans, peas, and tomatoes against diseases.

€178.66€223.32Halloween −20%
incl. VAT, plus shipping

Currently unavailable

Sold only to professional users with a certificate of competence.

Description

Botrefin: is a plant protection product - fungicide, in the form of a granule concentrate for preparing a water suspension (WG), with systemic and surface action, for preventive and interventive use in controlling diseases in strawberry, raspberry, bean, pea and tomato.

The product is intended for use with self-propelled or tractor-mounted field sprayers, orchard sprayers or hand sprayers.

Active substances content:

cyprodinil (compound from the anilinopyrimidine group) - 375 g/kg of product (37.5%),

fludioxonil (compound from the phenylpyrrole group) – 250 g/kg of product (25.0%)

Action

Fungicide in the form of a granule concentrate for preparing a water suspension (WG), with systemic and surface action, for preventive and interventive use in disease control.

Benefits:

  • well-known, proven formulation
  • wide range of controlled diseases
  • cost-effective solution
  • specialist in protecting fruits and vegetables against grey mould and other troublesome diseases

Use in crops:

- strawberry

- raspberry

- green bean

- common pea for fresh seeds

- tomato in greenhouse cultivation

Pre-harvest interval:

strawberry – 3 days,

raspberry – 7 days,

bean – 15 days,

pea – 15 days,

tomato – 3 days.

Warning! Plant protection products must be used safely. Before each use, read the information on the label and product information.

The buyer declares that they meet the conditions specified in Article 25 paragraph 3 point 5 of the Act of 8 March 2013 on plant protection products and have training in the use of plant protection products in the case of products for professional users. Before each use, read the information on the label and product information. Pay attention to detailed risk indications. Follow the safety rules contained on the label. Plant protection products may only be purchased by adults and persons who have completed training and have the qualifications required for persons purchasing plant protection products (Article 28 of the Act on plant protection products of 8 March 2013 as amended). Plant protection products must be used in a way that does not pose a threat to human health, animals or the environment. The buyer of plant protection products must be sober. By using this offer, you declare that you meet the above requirements.

Application and dosage

Crop

Pest Control

How to use? Dosage

When to apply?

strawberry

grey mould

Maximum / recommended dose for single application: 0.8 kg/ha

Apply preventively or at the first symptoms of disease, from the beginning to the end of the strawberry flowering phase.

raspberry

grey mould, cane blight

Maximum dose for single application: 1.0 kg/ha
Recommended dose for single application: 0.8 - 1.0 kg/ha

Apply preventively or at the first symptoms of disease, from early June:
- against grey mould 3 times during the growing season every 10 days in the flowering phase, from the moment 10% of flowers appear,
- against cane blight apply the first treatment before flowering, when new shoots reach 10-20 cm height, subsequent treatments every 10 days – during flowering (beginning, full bloom and end) and after fruit harvest and cutting of old fruiting canes, depending on disease occurrence and severity.

green bean

grey mould, sclerotinia stem rot, anthracnose

Maximum dose for single application: 1.0 kg/ha
Recommended dose for single application: 0.8 - 1.0 kg/ha

Apply at the first symptoms of disease on plants.

pea

grey mould, sclerotinia stem rot, ascochyta blight

Maximum dose for single application: 1.0 kg/ha.
Recommended dose for single application: 0.8 - 1.0 kg/ha.

Apply at the first symptoms of disease on plants, from the beginning of pea flowering.

tomato

grey mould

Maximum / recommended dose for single application: 0.1% (100 g product in 100 l water).

Apply at the first symptoms of disease on plants.

sweet cherry, sour cherry, plum tree

brown rot of stone fruit trees

Maximum dose for single application: 1.0 kg/ha.
Recommended dose for single application: 0.6 – 1.0 kg/ha.

Apply preventively or at the first symptoms of disease.

pear tree, quince

grey mould, bitter rot, wet rot, brown rot

Maximum dose for single application: 1.0 kg/ha.
Recommended dose for single application: 0.75 - 1.0 kg/ha.

Apply preventively or at the first symptoms of disease before harvest:
- single application (4 days before harvest) or
- two applications (14 and 4 days before harvest), depending on disease severity.

apricot, peach, nectarine

brown rot of stone fruit trees

Maximum dose for single application: 0.9 kg/ha.
Recommended dose for single application: 0.6 - 0.9 kg/ha.

Apply preventively or at the first symptoms of disease.

strawberry

anthracnose

Maximum / recommended dose for single application: 0.8 kg/ha.

Apply preventively or at the first symptoms of disease, from the beginning to the end of the strawberry flowering phase.

raspberry

anthracnose

Maximum dose for single application: 1.0 kg/ha.
Recommended dose for single application: 0.8 - 1.0 kg/ha.

Apply first treatment before flowering, when new shoots reach 10-20 cm height, subsequent treatments every 10 days – during flowering (beginning, full bloom and end) and after fruit harvest and cutting of old fruiting canes, depending on disease occurrence and severity.

blackberry

anthracnose, grey mould, cane blight

Maximum dose for single application: 1.0 kg/ha.
Recommended dose for single application: 0.8 - 1.0 kg/ha.

Apply preventively or at the first symptoms of disease, from early June:
- against grey mould – every 10 days during flowering, from 10% flower appearance,
- against anthracnose and cane blight – first treatment before flowering, when new shoots reach 10-20 cm height, subsequent treatments every 10 days – during flowering (beginning, full bloom and end) and after fruit harvest and cutting of old fruiting canes, depending on disease occurrence and severity.

black currant, red currant, white currant

anthracnose, grey mould, cane blight

Maximum dose for single application: 1.0 kg/ha.
Recommended dose for single application: 0.8 - 1.0 kg/ha.

Apply preventively or at the first symptoms of disease, from early June:
- against grey mould – every 10 days during flowering, from 10% flower appearance,
- against anthracnose and cane blight – first treatment before flowering, when new shoots reach 10-20 cm height, subsequent treatments every 10 days (beginning, full bloom and end of flowering) and after fruit harvest and cutting of old fruiting canes, depending on disease occurrence and severity.

blueberry, cranberry

anthracnose, grey mould, cane blight

Maximum dose for single application: 1.0 kg/ha.
Recommended dose for single application: 0.8-1.0 kg/ha.

Apply preventively or at the first symptoms of disease.

grapevine

grey mould, prevention of secondary pathogen infections, grapevine bark necrosis

Maximum / recommended dose for single application: 1.2 kg/ha.

Apply preventively or at the first symptoms of disease.

green pea, sugar pea

grey mould, sclerotinia stem rot, anthracnose, damping-off, powdery mildew

Maximum dose for single application: 1.0 kg/ha.
Recommended dose for single application: 0.8 - 1.0 kg/ha.

Apply preventively or at the first symptoms of disease on plants.

pea

damping-off, powdery mildew

Maximum dose for single application: 1.0 kg/ha.
Recommended dose for single application: 0.8 - 1.0 kg/ha.

Apply preventively or at the first symptoms of disease on plants.

bean, pea, white lupin, yellow lupin, narrow-leafed lupin

grey mould, sclerotinia stem rot, damping-off, powdery mildew, ascochyta blight

Maximum / recommended dose for single application: 1.0 kg/ha.

Apply preventively or at the first symptoms of disease on plants.

bean, broad bean

grey mould, sclerotinia stem rot, damping-off, powdery mildew, ascochyta blight

Maximum dose for single application: 1.0 kg/ha.
Recommended dose for single application: 0.8 - 1.0 kg/ha.

Apply preventively or at the first symptoms of disease on plants.

celeriac

grey mould, sclerotinia stem rot

Maximum / recommended dose for single application: 1.0 kg/ha.

Apply preventively or at the first symptoms of disease.

parsley, parsnip, beetroot, horseradish, rutabaga, turnip, salsify, carrot

grey mould, sclerotinia stem rot, alternaria leaf spot

Maximum / recommended dose for single application: 0.8 kg/ha.

Apply preventively or at the first symptoms of disease.

celery

grey mould, sclerotinia stem rot

Maximum / recommended dose for single application: 0.8 kg/ha.

Apply preventively or at the first symptoms of disease.

onion, shallot, garlic

neck rot of onion, sclerotinia stem rot, grey mould

Maximum / recommended dose for single application: 1.0 kg/ha.

Apply preventively or at the first symptoms of disease.

chives

sclerotinia stem rot, grey mould

Maximum / recommended dose for single application: 0.8 kg/ha.

Apply preventively or at the first symptoms of disease.

tomato, greenhouse cultivation

sclerotinia stem rot

Maximum / recommended dose for single application: 1.0 kg/ha.

Apply preventively or at the first symptoms of disease.

tomato, protected cultivation

grey mould, sclerotinia stem rot

Maximum / recommended dose for single application: 1.0 kg/ha.

Apply preventively or at the first symptoms of disease.

sweet pepper, eggplant, cucumber, courgette, protected cultivation, greenhouse cultivation

grey mould, sclerotinia stem rot

Maximum / recommended dose for single application: 1.0 kg/ha.

Apply preventively or at the first symptoms of disease.

lettuce, chicory, radicchio, endive, beetroot leaves, spinach

grey mould, sclerotinia stem rot

Maximum/recommended dose for single application: 0.6 kg/ha.

Apply preventively or at the first symptoms of disease.

herbal plants

grey mould, sclerotinia stem rot

Maximum/recommended dose for single application: 0.6 kg/ha.

Apply preventively or at the first symptoms of disease.

asparagus

grey mould, purple stem spot

Maximum / recommended dose for single application: 1.0 kg/ha.

Apply preventively or at the first symptoms of disease.

tobacco

sclerotinia stem rot

Maximum / recommended dose for single application: 0.6 kg/ha

Apply preventively or at the first symptoms of disease, usually from June.

ornamental plants

grey mould, prevention of secondary pathogen infections, cane blight, flower blight, brown rot of stone fruit trees

Maximum/recommended dose for single application: 1.0 kg/ha.

Apply preventively or at the first symptoms of disease.

fruit tree nurseries, ornamental tree nurseries

grey mould, prevention of secondary pathogen infections

Maximum/recommended dose for single application: 1.0 kg/ha.

Apply preventively or at the first symptoms of disease.

seed plantations, vegetable plants, herbal plants, ornamental plants

sclerotinia stem rot

Maximum/recommended dose for single application: 0.8 kg/ha.

Apply preventively or at the first symptoms of disease.

forest tree seedlings, forest tree saplings, forest nurseries, forest crops

grey mould, rusts, damping-off fungi, prevention of secondary pathogen infections

Maximum dose for single application: 1.0 kg/ha.
Recommended dose for single application: 0.75-1.0 kg/ha.

Apply preventively or at the first symptoms of disease, usually from April to September

coniferous forest tree seedlings, coniferous forest tree saplings, forest nurseries, forest crops

ascochyta blight

Maximum dose for single application: 1.0 kg/ha.
Recommended dose for single application: 0.8 -1.0 kg/ha.

Apply preventively or at the first symptoms of disease, usually from April to October

deciduous forest tree seedlings, deciduous forest tree saplings, forest nurseries, forest crops

powdery mildew, anthracnose

Maximum dose for single application: 1.0 kg/ha.
Recommended dose for single application: 0.75 -1.0 kg/ha.

Apply preventively or at the first symptoms of disease, usually from May to August

deciduous forest tree seedlings, deciduous forest tree saplings, forest nurseries, forest crops

canker, verticillium wilt

Maximum dose for single application: 1.0 kg/ha.
Recommended dose for single application: 0.8-1.0 kg/ha.

Apply preventively or at the first symptoms of disease, usually from May to September

Stay in touch with us

Once a month we write about price cuts, new stock and the treatment dates that are easy to forget. Enough to catch the offers — and not one message more.

Drawing: a gardener and a farmer with beers, one telling a story, the other laughing